P.E.S Products

P.E.S provides a wide range of products required for a complete piping system. Solid- wall polyethylene pipes up to 2500 mm along with complete sets of fabricated and injection molding fittings including tees, reducing tees, elbows, reducers, flanges, manhole, handhole, and polyethylene tank and polymer risers are produced by P.E.S.

PE Elbows

Elbow, HDPE Elbow, HDPE Fittings Elbow, PE Elbow | Agriculture, PE Elbows, PE fittings, Wastewater collection & transfer, Chemical industries, Oil industry, Mineral industries, Firefighting, Water supply, Applications | 0 Comments | | Return|

0 ( 0 reviews)

|

Elbows as PE fittings are widely used in transmission lines and networks. Elbows are mainly produced by injection and turning methods:

1. Injection: integrated by plastic injection

2. Turning: Multi-pieces by pipe welding

Elbows are divided into following types based on execution conditions:

PE elbows

90 ̊ elbow
60 ̊ elbow
45 ̊ elbow
30 ̊ elbow

PN: 2.5 to 25 Bar
α±0.2
30	45	60	90
Z_min	Z_min	Z_min	Z_min	r	le_min	D
214	249	288	390	240	150	160
222	262	305	420	270	150	180
230	274	323	450	300	150	200
241	290	345	488	338	150	225
350	412	466	625	375	250	250
362	424	492	670	420	250	280
428	498	576	773	473	300	315
443	520	608	833	533	300	355
461	548	646	900	600	300	400
481	58	689	975	675	300	450
551	665	783	1100	750	350	500
575	698	835	1190	840	350	560
603	741	896	1295	945	350	630
636	792	965	1415	1065	350	710
672	847	1043	1550	1200	350	800
762	960	1179	1750	1350	400	900
802	1022	1266	1900	1500	400	1000
930	1190	1480	2250	1700	400	1200
1000	1190	1480	2250	2100	450	1400
1000	1310	1480	2500	2400	450	1600
Comming Soon						1800
						2000
						2200
						2400